Outer Diameter: Φ 69mm(2.75″)
Inner Diameter: Φ 33 mm(1.30″)
Length: 5″, 10″, 20″, 30″, 40″,…,70″
PP Pleated Membrane Filter Cartridges
Description
Description of PP Pleated Membrane Filter Cartridges
The PP pleated membrane filter cartridge is fixed-diameter pre-filtering equipment with ultra-fine polypropylene fiber as its medium. The ultra-fine fiber has stable filtration precision, can effectively intercept tiny particles and colloidal impurities, and the filtration efficiency is up to 99.8%. The multi-layer structure design provides high pollution space. The filter area has the characteristics of containing a large amount of dirt and long use time.
The filtration accuracy of Hawach PP pleated filter cartridge ranges from 0.1um to 100um. Its unique low pressure difference, high throughput, and long service life makes it a good pre-filtered product. The all polypropylene structure is stable in performance and extensive in chemical compatibility.
Applications
Pharmaceutical industry: pre-filtering of various antibiotics and other liquids
Food and beverage industry: filtration of alcohol, mineral water, and drinking water
Oil industry: oilfield water injection filtration
Electronics industry: high purity water pre-filtering
Chemical industry: filtration of various organic solvents, acids, and alkalis.
Features of PP Pleated Membrane Filter Cartridges
Suitable for filtering strong acids, strong bases, and organic solvents
Large filtration area
Low-pressure difference
Strong dirt holding capacity
Long service life
Many micro rating for option
Technical parameters
Size:
OD: 69 mm(2.75″)
ID: 33 mm(1.30″)
Length: 5″, 10″, 20″, 30″, 40″,…,70″
End Cap: DOE(220), 226/FIN, 226/FLAT, 222/FIN, 222/FLAT
Material:
Filter media: PP
Endcap: PP
Inner core: PP
O-ring: silicone rubber, EPDM ( ethylene propylene rubber ), butadiene rubber, fluoro rubber
Filtration performance
Micro rating: 0.1um, 0.22um, 0.45um, 1um, 5um, 10um, 20um, 50um
Operating Temperature Normal <55°C (131 oF)
Operating Temperature Max. <80°C (176 oF)
Normal Flow Direction pressure: 4.0 Bar at 25°C
Reverse Flow Direction pressure: 2.0 Bar at 25 °C
Sterilization: Steam sterilization for 30 min at 121°C
Classify
Specifications
| Construction Materials | Filter Media | Polypropylene membrane |
| Support Layers | Polypropylene | |
| Inner core | Polypropylene | |
| Outer cage, End Cap | Polypropylene | |
| Seal Method | Thermal Bonding, No Adhesives | |
| O-rings/ Gaskets | Silicone/EPDM/Viton/PTFE/Nitrile | |
| Technical Data | Micron Rating | 0.1, 0.2, 0.45, 0.65, 1.0, 2.0,3.0,5.0,10, 30, 40, 50, 70, 100 um |
| Operating Temperature | Normal <55℃ (131 oF)
Max. <80℃ (176 oF) |
|
| Normal Flow Direction pressure | 4.2 bar (60.9 psi) at 25℃ (77℉ ) | |
| Reverse Flow Direction pressure | 2.1 bar (30.5 psi) at 25℃ (77℉ ) | |
| pH Value Compatibility | 1-13 | |
| Sterilization | Steam sterilization for 30 min at 135℃,
cumulative time:50 hours |
|
| Cartridge Size | Outer Diameter | Φ 69 mm(2.75’’) |
| Inner diameter | Φ 33 mm(1.30’’) | |
| Length(based on DOE end cap) | 10’’, 20’’, 30’’, 40’’ | |
| Filtration Area(m2) | 0.65 m2/10’’ | |
| Biosecurity | Endotoxin | <0.25 EU/ml |
| Extractable | ≤30 mg/10’’ | |
| Liquid retention ratings(um) test | 0.1 um
0.2 um 0.45 um 1.0 um 5.0 |
≥90%
≥90% ≥90% ≥90% ≥90% |
Order information
| Grade | Product | Micron(um) | End Cap | Length | O-ring/Gasket | Core |
| F-Food & beverage
P-pharmaceutical C-chemical E-electronics |
PP1 | 010-0.1
020-0.2 045-0.45 065-0.65 100-1.0 300-3.0 … |
AO-DOE(220)
CN-226/FIN CF-226/FLAT BN-222/FIN BF-222/FLAT EN-222 three locking ears/Fin |
05-5’’
10-10’’ 20-20’’ 30-30’’ 40-40’’ |
S-silicone
E-epdm N-nitrile T- encapsulated teflon V-viton |
B-temperature resistant
C-SS |
| e.g.：FPP1010AO5SC: Food & beverage+ PP2+0.1+DOE+5’’+Silicone+SS | ||||||
CONTACT FORM
Enter your email address and our sales staff will contact you as soon as possible.
