://Nylon Pleated Membrane Filter Cartridges

Nylon Pleated Membrane Filter Cartridges

Outer Diameter: Φ 69mm(2.75″)
Inner Diameter: Φ 33 mm(1.30″)
Length: 9.75″, 10″, 20″, 30″, 40″

Category:

Description

Description of Nylon Pleated Membrane Filter Cartridges

The nylon series of pleated membrane filter cartridges are processed by fusion welding using a hydrophobic nylon microporous membrane as the filter medium. High strength and good alkali resistance. Manufacturer’s integrity testing to ensure product filtration performance

Advantagese

The membrane stack consists of reinforced nylon membrane and inlet diversion layer.
The hydrophilic membrane don’t require pre-wetted.
Each medical grade filter cartridge is water-washed; each electronic grade filter cartridge is cleaned by ultrapure water.
Wide-hole filter design maximizes flow rate.
The pleated design increases the area of the filter to ensure its longer life.
Absolute filtration efficiency.
Excellent chemical compatibility
High protein and microbial absorption.
Uniform distribution of pure, strong mechanism and long service life.
No fiber migration occurs when cleaning with ultrapure water.
Filter cartridge 100% passed the integrity test.

Applications of Nylon Pleated Membrane Filter Cartridges

Filtration was carried out in ultrapure water and distilled water.
Remove liquid bacteria on beverages and food.
Remove of chemical raw materials and filter bacteria.
Remove bacteria of vaccines, serum and biological products .

Features

Uniform pore size distribution makes good filtration effect
Alkali resistant but not acid resistant, excellent oil and solvent resistance.
No fiber is falling off, in line with the requirements of the pharmaceutical and food industry
Made in cleaning workshop
Many micro rating for option

Technical parameters

Size:

OD:  69 mm(2.75’’)
ID:  33 mm(1.30’’)
Length: 9.75’’, 10’’, 20’’, 30’’, 40’’
End Cap: DOE(220), 226/FIN, 226/FLAT, 222/FIN, 222/FLAT

Material:

Filter media: Nylon
End cap: PP
Inner core: PP
O-ring: silicone rubber, EPDM ( ethylene propylene rubber ), butadiene rubber, fluoro rubber

Filtration performance
Micro rating: 0.1, 0.2, 0.45, 0.65, 1.0 um
Operating temperature Max. <90℃
Normal flow direction pressure: 4.2 Bar at 25 ℃
Reverse flow direction pressure: 2.1 Bar at 25 ℃
Sterilization : Steam sterilization for 30 min at 121℃

Specifications

Construction Materials Filter Media hydrophilic Nylon66 membrane
Support Layers Polypropylene
Inner core Polypropylene
Outer cage, End Cap Polypropylene
Seal Method Thermal Bonding, No Adhesives
O-rings/ Gaskets Silicone/EPDM/Viton/PTFE/Nitrile
Technical Data Micron Rating 0.1, 0.2, 0.45, 0.65, 1.0 um
Operating Temperature Normal <65℃ (149 oF)

Max. <90℃ (194 oF)

Normal Flow Direction pressure 4.2 bar (60.9 psi) at 25℃ (77℉ )
Reverse Flow Direction pressure 2.1 bar (30.5 psi) at 25℃ (77℉ )
pH Value Compatibility 6-14
Sterilization Steam sterilization for 30 min at 135℃,

cumulative time:50 hours

Cartridge Size Outer Diameter Φ 69 mm(2.75’’)
Inner diameter Φ 33 mm(1.30’’)
Length(based on DOE end cap) 10’’, 20’’, 30’’, 40’’
Filtration Area(m2) 0.65 m2/10’’
Biosecurity Endotoxin <0.25 EU/ml
Extractable ≤30 mg/10’’
100% Integrity test

7:3=IPA:Water

at 23℃(75 oF)

0.1 um

0.2 um

0.45 um

1.0 um

≥4.5 bar (65psi)

≥3.2 bar (46 psi)

≥2.0 bar (29 psi)

≥0.9 bar (13 psi)

Order Information

Grade Product Micron(um) End Cap Length O-ring/Gasket Core
F-Food & beverage

P-pharmaceutical

C-chemical

E-electronics

PN66 010-0.1

020-0.2

045-0.45

065-0.65

100-1.0

300-3.0

AO-DOE(220)

CN-226/FIN

CF-226/FLAT

BN-222/FIN

BF-222/FLAT

EN-222 three locking ears/Fin

05-5’’

10-10’’

20-20’’

30-30’’

40-40’’

S-silicone

E-epdm

N-nitrile

T- encapsulated teflon

V-viton

B-temperature resistant

C-SS

e.g.:FPN66010AO5SC: Food & beverage+ PN66+0.1+DOE+5’’+Silicone+SS
CONTACT FORM
Enter your email address and our sales staff will contact you as soon as possible.